Modelo: HSG00215
Capacidad: 7800mAh ~ 12000mAh optional
Aporte: 13V~18V / 1.0UN MÁXIMO
Producción: 5V / 2.1UN MÁXIMO, 12V / 4UN MÁXIMO, 16V / 4UN MÁXIMO, 19V / 4UN MÁXIMO
Color: Negro + naranja, negro + verde, negro + red or OEM
Tamaño: 162.2 (l) * 77.2 (W.) * 36.5 (h) milímetros
noroeste: 460GRAMO
G.W.: 800GRAMO
Tamaño de embalaje: 260 (l) * 185 (W.) * 50 (h) milímetros
Cantidad: 8piezas / caja de cartón
Tamaño del cartón: 430 (l) * 270 (W.) * 210 (h) cm
FCL Weight: about 7.5KG - (less than 8.0KG)
Certificación: CE FCC ROHS etc.
Product Introduction
Products for the Apple iPad, iPad2, Iphone 4 / 5 / 5C / 5S, iPod, also applies to Nokia, Samsung, LG, HTC, Blackberry, SONY and other brands and most models MP3, MP4, GPS, Bluetooth speakers, etc.. interface microUSB, miniUSB consumer electronics products and notebook computers and other 12V 19V input output devices.
Luxurious and elegant styling, stylish and elegant. Small size, gran capacidad, whether in the car or at home or office or outside, listo para cargar, reducing the need for frequent charging you the trouble.
Exclusive support synchronous rectification boost technology and synchronous rectifier charging technology, 10 years of experience to build high-performance power products. Use ultra-low temperatures.
Key features:
Press a button to open the 5V / 2.1A and 12V / 4A output, open 5V and 12V on the basis of long press the button for 5 segundos, switch to 5V and 16V outputs (16V corresponding orange Luces led arriba), open 5V and 16V, based on the long press the button for 5 segundos, switch to 5V and 19V outputs (19V corresponding green LED lights up), then 5 seconds can switch to 5V / 12V.
Charging indicator:
The first one LED flash represents about 0-25% of the electricity; the first one LED lit the first two LED flashes, said about 25 a 50 percent capacity; 1st, 2nd 3rd LED lit LED flashes, said about
50 a 75% of the electricity, the first 1,2,3 LED lit LED flashes indicate the first four of about 75 a 99 percent capacity; 1,2,3,4 LED lit represents a 100% charge.
Multiple protection features: hardware protection (three series dedicated battery protection circuit + homeostasis circuit) + MCU software protection, over-current, over-voltage, over-discharge, sobrecargar, low voltage, cortocircuito, light-load protection.
* Ignition function
* Highlight lighting function
* LED strobe + SOS function
* Multi-pack voltage output function
Ignition IMPORTANT:
1. Make sure the starter has more than 3 LED grid electricity (más que 80% capacidad)
2, the battery clip on the dead car battery to be started (the original battery is not removed), red clip original battery positive, black clip original battery negative, then the cord plug into WPB-CJS01 host.
3, the normal method of operation into the cab ignition to start the car.
4, the first connection quickly after the car starts WPB-CJS01-02 host battery clip cord removed, then the positive and negative battery clip removed, the car starts to complete.
5, in normal use, it is recommended every five consecutive starts to stand for 30 minutes to prolong battery life.
6, it is recommended every 30 days to fully charge / discharge once the battery maintenance and ensure the battery is easy to keep an emergency situation under normal use fully charged state.