Specification:
| Model | HSG00241 |
| Capacity | 5600mAh |
| Input | DC5.0V / 1A |
| Output | DC5.0V / 1A |
| Volume | 109 * 24 * 24 mm |
| weight | 105g |
| Color | White / red / Green / yellow/Black /Pink |
| Applicable models | more than 2000 kinds of iOS / Android / BlackBerry / Windows Phone / Symbian platform mobile phone, iPhone, iPod, PDA, PMP, PlayStatio |
| Accessories | 1 piece Micro USB, |
| Product features | built-in high capacity lithium battery 18650 3.7V 5600mAh |
Frequently Asked Questions:
1. 30 seconds after the charging plug in the phone displays USB connection is bad what is the reason?
A: Yes, because there is no power switch, power supply chips for protection, automatic power off the. So show the charger is bad. Turn the power switch on it.
2. After a full charge if the need for timely unplug the charger power?
A: There are protection circuit, do not unplug the post can be filled.
3. When the USB output terminal accidentally shorted What will happen? How to deal with?
A: No voltage output, LED light does not shine. Internal protection circuit is activated, you can simply activate your energy.
4. Why I cannot charge the digital products?
A: Please perform the following steps in order to detect:
a. Determine whether the mobile power discharge switch is turned on?
b. Charging connector match? If match, replace the appropriate connector or use rechargeable USB cable to recharge;
c. Test their digital products voltage is 5V;
d. Detecting whether the digital product battery charging protection program to be written? Consulting detect whether official or other digital products can be properly charged;
e. Determined that the digital product charging input port is out of the question? Repairs to the relevant point of contact;
f. Determine whether the charging IC digital products out of the malfunction charging high voltage? AC normal charge, purchase a longer time, rapid battery depletion phenomenon may be a main reason for charging IC failure;
g. Other possible.